Handheld laser welding · Vernon, NJ

Laser welding services

Aluminum, steel and stainless steel welded on a 2 kW IPG LightWELD handheld laser welder in Vernon, NJ. It lays clean seams on thin stainless that need less grinding and finishing after the weld. Send a drawing or a STEP file and get a quote within 1 business day.

At a glance
  • 2 kW IPG LightWELD handheld laser welder
  • Aluminum, steel and stainless steel
  • Thin stainless and clean, visible seams
  • Less grinding and finishing after the weld
  • Quote within 1 business day
Specifications

What we laser weld

Machine2 kW IPG LightWELD handheld laser welder
MaterialsAluminum, steel and stainless steel
Best forThin stainless, clean visible seams, and parts that should need little grinding or finishing
Other welding on the floor7 axis Fronius robotic welding cell, MIG and TIG stations
Before the weld6 kW fiber laser cutting, tube laser cutting and CNC press brake forming in the same shop
After the weldPaint, zinc coating, clear coat and polishing in house. Powder coating and anodizing through finishing partners we manage
Quote turnaroundWithin 1 business day
How it works

Three steps from file to finished parts

  1. 1

    Send your file

    Send a drawing or a STEP file. Add the material, thickness, quantity and the date you need it, and mark which seams will show on the finished part.

  2. 2

    We check it and quote

    We look at every joint and decide which ones belong on the laser and which ones are better on TIG, MIG or the robotic cell. You get a price within 1 business day.

  3. 3

    We weld and ship

    Parts are welded, finished if you need it, and packed. Our own truck delivers within about 80 miles of Vernon, and everything else ships by UPS or freight.

What laser welding is good for

A laser welder puts its heat into a very small spot. Less heat spreads into the rest of the part, so thin sheet is less likely to warp and the seam stays narrow and even.

That is why we use the LightWELD on thin stainless, on seams that will show on the finished part, and on parts where every minute of grinding after the weld adds cost. A clean laser seam often needs only a light finish instead of grinding a heavy bead flat.

Laser welding is not the answer for every joint. Heavier weldments and structural frames usually run better on MIG or in the robotic cell, and some joints still need a skilled hand on a TIG torch. Because all of those are on the same floor, each joint gets the process that suits it.

Aluminum, steel and stainless steel

The LightWELD welds aluminum, steel and stainless steel. Tell us the grade and the thickness of each part, and the finish you need on the visible faces, such as brushed, polished or painted.

Stainless is where laser welding earns its place most often. Thin stainless panels, enclosures, trim and housings can be joined with a seam that is close to finished when it comes off the bench.

Cut, formed and welded in one shop

A laser weld is only as good as the fit of the parts it joins. Parts cut on our 6 kW fiber laser and formed on our CNC press brakes meet with a tight, even fit, and tab and slot joints let parts locate each other before the first weld goes in.

Tube parts come off our tube laser already coped and ready to weld. After welding, paint, zinc coating, clear coat and polishing are done in house, and powder coating and anodizing go through finishing partners we manage. One quote and one shop from flat sheet or a full stick of tube to a finished assembly.

Laser welding for New Jersey, New York City, Pennsylvania and Connecticut

The shop is in Vernon, New Jersey. Our own truck delivers within about 80 miles: North and Central New Jersey, all five boroughs of New York City, Westchester, Rockland, the Hudson Valley, northeast Pennsylvania and southwestern Connecticut. Smaller orders ship by UPS and larger ones by freight anywhere in the United States, and pickup at the shop is welcome.

From the floor

Cut, formed and welded in Vernon, NJ

Common questions

Laser welding FAQ

What laser welder do you use?

A 2 kW IPG LightWELD handheld laser welder, run by our own welders in Vernon, NJ.

What metals can you laser weld?

Aluminum, steel and stainless steel. Tell us the grade and thickness when you send the file.

When is laser welding the right choice?

Thin stainless, seams that show on the finished part, and parts where you want less grinding and finishing after the weld. Heavier work usually runs better on MIG or in our robotic cell, and we tell you which process fits each joint when we quote.

How fast can I get a quote?

Within 1 business day. Send a drawing or a STEP file with the material, thickness and quantity.

What should I send?

A STEP file or a dimensioned drawing, the material and thickness of each part, the quantity, and which seams will be visible. If you only have a sketch, send it with dimensions.

Can you cut and form the parts before welding?

Yes. Sheet parts are cut on a 6 kW fiber laser and formed on CNC press brakes, and tube is cut on our tube laser, all in the same building as the welding.

Do you laser weld for customers in New York City, Pennsylvania and Connecticut?

Yes. Our own truck covers about 80 miles from Vernon, NJ, including all five boroughs, northeast Pennsylvania and southwestern Connecticut. Everything else ships by UPS or freight anywhere in the United States.

Can I order laser welded parts online?

Yes. Upload your part at parts.teomfg.com: make a free account, add your STEP file, and follow your quote there. Quotes come back within 1 business day.

Send us your file

Attach a drawing or STEP. Get a quote within 1 business day.

Add the material, thickness, quantity, the date you need the parts, and which seams will show. You can also upload your part online and follow your quote there.