Cut, formed & welded · Vernon, NJ

Sheet metal fabrication

Brackets, enclosures, panels, chassis and welded assemblies made from flat sheet in Vernon, NJ. Every step from laser cutting to forming, hardware, welding and finishing runs on one floor. Send a STEP or DXF and get a quote within 1 business day.

At a glance
  • 6 kW fiber laser, 60″ × 120″ bed
  • Two Amada CNC press brakes, 80 and 50 ton
  • PEM hardware, robotic, laser, MIG and TIG welding
  • Deburring and finishing in the same shop
  • Quote within 1 business day
Specifications

What the shop runs

Laser cutting6 kW fiber laser with a 60″ × 120″ bed. Up to 1″ steel, 5/8″ aluminum and 1/2″ stainless
FormingAmada HDS-8025 (80 ton) and HG-5020 (50 ton) CNC press brakes
HardwarePEM nuts, studs and standoffs on a 618 press and an automated, self feeding 1025
Welding7 axis Fronius robotic cell, 2 kW IPG laser welder, MIG and TIG. AWS D1.1 certified
DeburringTwo stage automated deburring and finishing station
FinishingPaint, zinc coating and clear coat in house. Powder coating and anodizing through partners we manage
Sheet sizes48″ × 96″ and 60″ × 120″
Quote turnaroundWithin 1 business day
How it works

Three steps from file to finished parts

  1. 1

    Send your file

    A STEP file of the finished part is best. A DXF of the flat with a dimensioned print works too. Add the material, thickness, quantity, finish and the date you need it.

  2. 2

    We check it and quote

    We look at the flat, the bends, the hardware and the welds, flag anything that will cost more than it should, and send a price within 1 business day.

  3. 3

    We make it and ship

    Parts are cut, formed, fitted with hardware, welded, deburred and finished on one floor, then packed. Our own truck delivers within about 80 miles of Vernon, and everything else ships by UPS or freight.

Every step on one floor

TEO Fabrications has run production in Vernon, New Jersey since 1987. A sheet metal part here goes from a flat blank to a finished, hardware loaded, welded and coated part without leaving the building. There is no second vendor for bending, no outside shop for hardware and no waiting on a separate welder.

That matters most on parts with several steps. Each handoff between vendors adds lead time, freight and another chance for a part to come back wrong. One shop holding the whole sequence means one quote, one schedule and one team answering for the result.

Cut on a 6 kW fiber laser

Blanks are cut on a 6 kW fiber laser with a 60″ × 120″ bed, so full 5 by 10 foot sheets go on the table whole. It cuts steel up to 1″, aluminum up to 5/8″ and stainless up to 1/2″. Parts are nested across the sheet to use less material, which shows up in the price on production runs.

Formed on two Amada CNC press brakes

An 80 ton HDS-8025 takes the heavier and longer bends and a 50 ton HG-5020 keeps smaller parts moving at the same time. Bend sequences are programmed from your file, so angles repeat from the first part to the last and assemblies fit at welding.

Hardware, welding, deburring and finishing

PEM nuts, studs and standoffs are pressed in right after forming, on a 618 press for short runs and an automated, self feeding 1025 for volume. Welding runs in a 7 axis Fronius robotic cell for repeat parts, on a 2 kW IPG laser welder for thin stainless and clean seams, and on MIG and TIG stations. Welding is AWS D1.1 certified.

Edges go through a two stage automated deburring station, so parts come out clean and safe to handle. Paint, zinc coating and clear coat are done in house. Powder coating and anodizing go through finishing partners we manage, so the part still comes back to you from one shop.

Designing sheet metal parts that cost less

Use one inside bend radius across the part where you can. Every different radius can mean a different tool setup at the brake.

Keep holes and slots back from the bend line. A hole that sits too close to a bend stretches out of round when the flange is formed. If you are unsure how close is too close for your material and thickness, send the file and we flag it when we quote.

Add bend reliefs where a bend meets an edge, and call out PEM hardware by part number so we press in the right size. When a part will be welded, tell us which faces show on the finished product so the welds and finish suit it.

Delivered across New Jersey, New York, Pennsylvania and Connecticut

Our own truck delivers within about 80 miles of Vernon: North and Central New Jersey, all five boroughs of New York City, Westchester, Rockland, the Hudson Valley, northeast Pennsylvania and southwestern Connecticut. Everything else ships by UPS or freight anywhere in the United States, and pickup at the shop is welcome.

Stocked material

Sheet in stock, ready to cut

MaterialStocked thickness
Steel (mild)22 ga to 1/2″
Stainless 30422 ga to 1/2″
Stainless 31618 ga to 1/4″
Aluminum 50520.036″ to 1/2″
Aluminum 6061-T60.036″ to 1/2″
Aluminum 30030.036″ to 1/8″
Galvanized G9022 ga to 11 ga
Galvanneal22 ga to 11 ga
Brasssourced per job

Sheet formats: 48″ × 96″ and 60″ × 120″. Thicker plate and specialty alloys are sourced per job. All equipment

From the floor

Sheet metal work in Vernon, NJ

Common questions

Sheet metal fabrication FAQ

What sheet metal work do you do in house?

Laser cutting, CNC press brake forming, PEM hardware insertion, robotic, laser, MIG and TIG welding, deburring, and paint, zinc coating and clear coat. Powder coating and anodizing go through finishing partners we manage.

What materials and thicknesses do you stock?

Mild steel and 304 stainless from 22 gauge to 1/2″, 316 stainless from 18 gauge to 1/4″, aluminum 5052 and 6061 from 0.036″ to 1/2″, aluminum 3003 to 1/8″, and galvanized and galvanneal from 22 to 11 gauge. Brass is sourced per job.

What press brakes do you run?

Two Amada CNC press brakes: an 80 ton HDS-8025 and a 50 ton HG-5020.

How fast can I get a quote?

Within 1 business day. Send a STEP or DXF with the material, thickness, quantity and finish.

What file should I send?

A STEP of the finished part is best because it shows the bends, hardware and welds. A DXF of the flat with a dimensioned print works too. If you only have a sketch, send it with dimensions.

Can you weld and finish the parts too?

Yes. Welding is AWS D1.1 certified and runs in a robotic cell, on a laser welder and on MIG and TIG stations. Paint, zinc coating and clear coat are done in house.

Do you deliver sheet metal parts to New York City?

Yes. Our own truck covers about 80 miles from Vernon, NJ, including all five boroughs. Everything else ships by UPS or freight anywhere in the United States.

Can I order sheet metal parts online?

Yes. Upload your part at parts.teomfg.com: make a free account, add your STEP or DXF, and follow your quote there. Quotes come back within 1 business day.

Send us your file

Attach a STEP or DXF. Get a quote within 1 business day.

Add the material, thickness, quantity, finish and the date you need the parts. You can also upload your part online and follow your quote there.